From XastirWiki
(Redirected from Fedora)
Jump to: navigation, search

Xastir by RPM

Xastir is now included in the Fedora Distribution!
Thanks to the efforts of the guys over at the Fedora Amateur Radio Special Interest Group, Xastir is included in the Fedora repositories. You can install Xastir simply by using the command: 

sudo yum install xastir

See the Sudo notes for help in setting up sudo.
If you're not familiar with sudo, See links and notes below

  • This will install all the requisite libraries and the Xastir binaries.
  • If you want to use more than the default maps and online maps, you'll need to download maps as described in README.MAPS .
  • Regardless of using the RPM or CVS version, you'll need to configure Xastir for your use - see the built in 'help' system for details.
  • If you want the latest possible version of Xastir, follow the instructions here to install the CVS version.

Install Xastir from CVS

Notes and privileges

  1. It is strongly suggested you read the entire INSTALL file first.

    2. This is not meant to be a replacement for INSTALL - but simply a distro-centric abridgment.
    A sort of 'check-list' if you will.

    This link will take you to a current copy of Xastir's INSTALL file.

  2. This how-to assumes your system has a working connection to the Internet.
  3. First, you'll need a console (terminal). You can open a console via: Application -> Accessories -> Terminal (Depending on your desktop, you may also find it at: Applications -> System Tools -> Terminal)
  4. Many commands used to install software require root privileges.

    5. Two ways to gain root privileges (other than logging in as root) are:

    • the su command
    • the sudo command

    su will elevate you to 'root' privileges and leave you in the current directory, but retains the user's environment. Return to 'normal user' privileges by typing 'exit'. If you encounter environment based erros, try "su -" instead. Just be sure to change to your working directory!

    sudo followed by a command will grant privileges for just that command, automatically dropping you back to normal privileges when that command is completed. Sudo is generally considered safer than su, but it does need to be setup before you can use it. See the Sudo notes for instructions on setting up sudo. Using sudo respects the same Unix tradition of not logging in as root except when necessary. The Fedora Unity project also has a sudo howto.

    'su' is immediately available without any setup, but does - conceivably - carry some risks. Any command you give after using 'su' will be performed with root privileges - until you type exit to return to normal privileges. It's possible you may forget you have root privileges and inadvertently damage your system, it's installed programs or even expose your system to exploit. If you follow this how-to and don't issue any extra commands, you should be fine.

Check your Development Setup

  1. For help installing Fedora see The Fedora 20 install guide - available in several formats. There are also several 'personal setup' guides online, that will help you to customize and configure your Fedora install. One of the more popular ones is mjmwired.net's Personal installation guides,
  2. If by chance, you didn't install Fedora with the required development tools, you'll have to add them in now.
    To see if you have them or not. Simply run:
    3. sudo yum grouplist
[user@localhost ~]$ sudo yum grouplist
Loaded plugins: fastestmirror, presto, refresh-packagekit
Setting up Group Process
Loading mirror speeds from cached hostfile
updates/metalink                                         |  17 kB     00:00     
* fedora: astromirror.uchicago.edu
* rpmfusion-free: mirror.web-ster.com
* rpmfusion-free-updates: mirror.web-ster.com
* rpmfusion-nonfree: mirror.web-ster.com
* rpmfusion-nonfree-updates: mirror.web-ster.com
* updates: astromirror.uchicago.edu
rpmfusion-free-updates                                   | 3.3 kB     00:00     
rpmfusion-nonfree-updates                                | 3.3 kB     00:00        
 Installed Groups:
 ::snipped::
 Available Groups:
 ::snipped::
Done

    I've removed the actual group listings from that output and replaced them with ::sinpped::. It will be different for every install.
    You'll see what groups you have installed. Look through the first part, "Installed Groups". You want to find these 1 group (Fortunately, they're listed in alphabetical order):

    • Development Tools

    If it's not there, install the group with: 

    sudo yum groupinstall "Development Tools" <enter>

Now, to work...

Install required RPM packages

These packages are included in the Fedora repositories and can be installed using Fedora's package management tools. They will also be automatically updated as new versions become available.

Notes

  1. To be used with Xastir, all application packages will require their associated 'devel' packages to be installed. Libraries, by their nature, do not require 'devel' packages.
  2. The 'install' commands require root privileges.
    • Enter the command 'su' and then give the root password and continue.
    • Or after setting up sudo (suggested), add sudo to the beginning of each command line.

    This first package's install line would become: 

    sudo rpm -q GraphicsMagick <enter>
  3. Don't be surprised if other packages, dependencies, are installed as well! That's the beauty of using YUM and the RPM system. If something else is needed to make your chosen package work correctly, it will installed at the same time.
  4. I'll go through some detail with the first one. I'll simplify the rest and assume you can follow the pattern.
  5. None of the following command line examples include the shell prompts
    • [user@localhost ~]$ (user prompt)
    • [root@localhost ~]# (root prompt)

Packages

  1. GraphicsMagick

    2. You can use either GraphicsMagick or ImageMagick. GraphicsMagick is the Fedora default and currently preferred.
    Simply run: 

    rpm -q GraphicsMagick <enter>

    You should get a response similar to: 

    GraphicsMagick-1.3.14-1.fc16.i686

    This tells you GraphicsMagick is installed and exactly what version it is. Exact numbers in the version string may be different
    If you get this instead: 

    Package GraphicsMagick is not installed

    Then install it with: 

    yum -y install GraphicsMagick <enter>

    Install GraphicsMagick-devel. 

    yum -y install GraphicsMagick-devel <enter>
    • You can combine these steps into one.

    If you didn't have GraphicsMagick, you surely don't have GraphicsMagick-devel. Get both like this: 

    yum -y install GraphicsMagick GraphicsMagick-devel <enter>

    I'll be leaving out the <enter> for the rest of the commands. You can safely assume it's there

    Note added by KM5VY: If you chose a minimal installation above and left out the Gnome Software Development group (which is large and mostly unnecessary), then you must also install "lcms" and "lcms-devel" here, as they are required by GraphicsMagick and for some reason not pulled in as an automatic dependency.

  2. Festival

    3. Optional: festival provides speech synthesis allowing Xastir to 'talk' to you. Of course, you'll also need a working sound card and speakers.
    Install Festival and Festival-devel, if not already present. 

    rpm -q festival

    If not installed, then install festival and it's devel package. 

    yum -y install festival festival-devel
  3. Libtiff

    4. Verify presence of the libtiff development libraries 

    rpm -q libtiff-devel

    If not installed, install it 

    yum -y install libtiff-devel
  4. Lesstif

    5. note: In the past, Fedora included OpenMotif, but due to an incompatible license from OpenMotif, Fedora now includes lesstif instead. CentOS does use openmotif - don't force the install of the lestif-devel libraries or you'll break other things. Just use openmotif-devel on CentOS - works fine.

    Verify presence of lesstif 

    rpm -q lesstif

    If present, verify presence of lestif development package 

    rpm -q lesstif-devel

    If either are not present, install whatever is missing 

    yum -y install lesstif lesstif-devel
  5. PCRE (Perl Compatible Regular Expressions)

    6. The DBFAWK capability of xastir requires PCRE. We do not recommend building xastir without DBFAWK capability if you plan on using shapefiles. PCRE will probably not be installed already, so just install it: 

    yum -y install pcre pcre-devel

Tar balls

These packages are not included in the Fedora repositories, so must be manually installed and updated.

Setup and Preparation

  1. Create/Choose working directory

    2. Change to your to your working directory of choice.
    Tradition would suggest /usr/local/src. I use my home directory /home/<username>. You may also make a /source or /src directory most anywhere in the filesystem and use that. Totally up to you where you do this or what you call it. To continue, just make it is your current directory. Use the "pwd" to show your current directly.

  2. ldconfig
    • ld.so.conf is the configuration file for ldconfig. Find it in the /etc directory.
    • Use vi, gedit or your favorite text editor to check /etc/ld.so.conf and make any changes as needed.
    • Verify that /usr/local/lib, /usr/lib, and /usr/X11R6/lib are all listed.

    If not, just add each to it's own line. Something like: 

    /usr/local/lib
/usr/lib
/usr/X11R6/lib
include ld.so.conf.d/*.conf

    That last line include ld.so.conf.d/* should already be there. After all the 'tar ball' sourced libraries are installed, execute ldconfig to update the library cache. 

    /sbin/ldconfig

    This will allow the compiler to find the required libraries on your system.

Get, Compile and install libraries

  • Some of the following examples include the sudo command. If you already have root privleges, maybe by using su, just leave sudo off the lines below.
  • The scripts directory in the Xastir source tree (~/xastir/scripts) contains shell scripts that can automate some of these and other functions. Once you have Xastir up and running I suggest exploring those scripts.
  • The following lines will download the required 'tarball' into your current directory, extract them, build and install the libraries. You can "cut and paste" each line - one at a time - to your console and execute.
  1. Install libproj

    2. Change to your working directory. Verify with 'pwd'. Then, execute: 

    wget http://download.osgeo.org/proj/proj-4.8.0.tar.gz
tar xzvf proj-4*.gz 
cd proj* 
cd nad 
wget http://download.osgeo.org/proj/proj-datumgrid-1.6RC1.zip
unzip *.zip 
cd ../ 
./configure 
make 
sudo make install

    The proj-datumgrid file must be extracted into the nad directory before libproj is compiled, as indicated in the steps above.

  2. Install libgeotiff

    3. Change to your working directory. Verify with 'pwd'. Then, execute: 

    wget ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/libgeotiff-1.4.0.tar.gz 
tar xzvf libgeotiff*.gz 
cd libgeotiff* 
./configure 
make 
sudo make install

    NOTES:

    • libgeotiff and libgeotiff-devel are available in the Fedora repositories, but are at version 1.2.5.

    You may install them using "sudo yum install libgeotiff-devel", instead of installing from source.

    • If you intend to install the GDAL map tools via yum (not covered in this howto), it is suggested you also use yum to install libgeotiff and NOT via source as described here
    • I was unable to get Xastir to compile after removing libgeotiff 1.3.0 and installing 1.2.5 from the repositories. libgeotiff is listed as a dependency for GDAL. You'll have to find

    a way around this 'limitation' to use GDAL from the repositories. It may be 'cleaner' to install GDAL from source as well.

  3. Install ESRI shapelib support

    4. Change to your working directory. Verify with 'pwd'. Then, execute: 

    wget http://dl.maptools.org/dl/shapelib/shapelib-1.2.10.tar.gz 
tar xzvf shapelib*.gz 
cd shapelib* 
make lib 
sudo make lib_install
  4. Update library cache

    5. Execute 

    /sbin/ldconfig
    • Once all libraries are installed, you may safely delete the tarballs and their source directories.

Get and compile Xastir from CVS

  • If you're using su, just leave off each instance of sudo that follows.
  • See the CVS Notes page for information on using and configuring CVS for your system.
  1. Checkout Xastir source from CVS
    2. cd ~ <enter>

    Enter this full line and hit enter (you can cut 'n paste it from here) 

    cvs -d:pserver:anonymous@xastir.cvs.sourceforge.net:/cvsroot/xastir login

    When asked for a password, just hit the 'enter' key - leave it blank. Then enter this full line and hit enter: 

    cvs -z3 -d:pserver:anonymous@xastir.cvs.sourceforge.net:/cvsroot/xastir co -P xastir

    This will create the ~/xastir directory and place the current source tree there. To update, in the future cd into this directory (cd ~/xastir) and then run 'cvs update -d'.

  2. Build Xastir
    3. cd ~/xastir
./bootstrap.sh 
./configure 
make 
sudo make install
    • When ./configure finishes, it'll give you a list of what is going to be built into Xastir.

    Following this guide, you'll have: 

    xastir 2.0.5 has been configured to use the following
options and external libraries:

MINIMUM OPTIONS:
  ShapeLib (Vector maps) ................. : yes

RECOMMENDED OPTIONS:
  GraphicsMagick/ImageMagick (Raster maps) : yes (GraphicsMagick)
  pcre (Shapefile customization) ......... : yes
  dbfawk (Shapefile customization) ....... : yes
  rtree indexing (Shapefile speedups) .... : yes
  map caching (Raster map speedups) ...... : yes
  internet map retrieval ................. : yes (libcurl)

FOR THE ADVENTUROUS:
  AX25 (Linux Kernel I/O Drivers) ........ : no
  libproj (USGS Topos & Aerial Photos) ... : yes
  GeoTiff (USGS Topos & Aerial Photos) ... : yes
  Festival (Text-to-speech) .............. : yes
  GPSMan/gpsmanshp (GPS downloads) ....... : no

xastir will be installed in /usr/local/bin.
Type 'make' to build Xastir (Use 'gmake' instead on some systems)

    Now, do as instructed and run 'make' to actually build Xastir, then run 'make install' to install Xastir to your system.

    Yup - that's it!

    • Xastir's support files are now installed to /usr/local/share/xastir.
    • The Xastir executable is now in /usr/local/bin
    • Xastir libraries are now in /usr/local/lib.

    Use it!!

    Start Xastir by typing: 

    xastir <enter>
    • This will allow you to see any error messages or problems in the console.
    • First time you start Xastir, it'll make a ~/.xastir directory and create several files.
    • ~/.xastir is where your log files, snapshots and configurations reside.

    Now, setup your station and enjoy!
    File > Configure > Station

    Notes, Errors and Questions

    notes

    1. dbfawk will not be enabled unless you installed pcre and pcre-dev.
      • If you plan to use shapefiles, we do not recommend installing Xastir without dbfawk support
    2. If you're using a serial TNC, you may run into permission problems in accessing the serial port for your TNC.

      3. A way to fix this is to set the User ID bit on the xastir binary. Do that with this command: 

      sudo chmod 4755 /usr/local/bin/xastir

      This allows Xastir to run with the privileges of the file owner, root - if you've followed this guide.

    3. If you need/want other libraries/capabilities

      4. Read the INSTALL file found in your xastir source directory. Everything is pretty much is spelled out.

  3. What's my com port?

    4. If you're using a serial TNC, your serial ports are: 

    /dev/ttyS0 (what windows would call 'COM1')
/dev/ttyS1 (what windows would call 'COM2')

    Errors

    1. Character \xx not supported in font

      2. You may see an error in the console similar to: 

      "Character '\55' not supported in font"

      No biggy and you can safely ignore it. However, if you'd like to correct this, see the appropriate section in the FAQ, find the FAQ in your xastir source directory. You're looking for: 

      4.13 Why do I see "Character '\55' not supported in font"?

      You can read it online at: Xastir FAQ

    2. Make errors on Print.h

      3. If you receive an error after running "make", similar to: 

      gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/include -DXASTIR_DATA_BASE=\"/usr/local/share/xastir\"
-g -O2 -pipe -W -Wall -Wpointer-arith -Wstrict-prototypes -Wno-unused-parameter -pthread -I/usr/include -MT
alert.o -MD -MP -MF .deps/alert.Tpo -c -o alert.o alert.c
In file included from /usr/include/Xm/XmAll.h:46,
from alert.c:308:
/usr/include/Xm/Xm.h:76:34: error: X11/extensions/Print.h: No such file or directory
In file included from /usr/include/Xm/XmAll.h:46,
from alert.c:308:
/usr/include/Xm/Xm.h:858: error: expected specifier-qualifier-list before âXPContextâ
In file included from /usr/include/Xm/XmAll.h:88,
from alert.c:308:
/usr/include/Xm/Print.h:46: error: expected declaration specifiers or â...â before âXPFinishProcâ

      Just install the missing libraries: 

      yum install libXp libXp-devel <enter>

      and try "make" again - no need to re-run configure. libXp-devel contains the missing Print.h header.

    3. Other "No such file or directory" errors from 'make'

      4. If you get some other 'make' error about a missing header or file. try: 

      yum whatprovides <missing header name>

      and then install the package and package-devel indicated.

      More questions?

      Any questions? Ask on the reflector. http://www.xastir.org/mailman/listinfo/xastir

Retrieved from "http://xastir.org/index.php?title=HowTo:Fedora&oldid=6132"